Water Feature Fountain Project Construction Process

1. pool construction, pool depth can not be less than 0.6 metres–water feature fountain

First of all, the construction of the pool is an important part of the water feature fountain in the construction, in order to prevent its water droplets splashed outside the pool, the need to create the external environment with a certain slope and roughness, and the depth of the pool should be maintained at 0.6 metres or more, in the water supply link, you can quote a higher water level of the water source, the cycle of water supply.

fountain dealers

2. anti-leakage construction, to ensure sufficient strength to withstand water pressure–water feature fountain

Secondly, the quality of anti-leakage project to determine the service life and safety of the water feature fountain, in the construction needs to ensure its strong pressure resistance. In addition, the lighting construction device needs to set leakage protection switch. Water feature fountain using lighting facilities, lamps and lanterns must be installed in a high strength shell, transformer high and low voltage coils need to have insulation protection.

fountain equipment manufacturers

3. pump room construction, the pump can not be placed in the exposed environment–water feature fountain

Finally, the water supply for the fountain pump should be set in a fixed position. Can not be too exposed to the outside environment, if you need to pressure water separation, to use the water distributor for, water supply valves need to be installed cut-off settings.

fountain contractor